Shipping

Unless you sell only downloadable products, you will have to ship merchandise to your customers. CRE Loaded uses shipping modules to automatically figure the cost of shipping and add this amount to the customer's order total. If you use more than one shipment method, you can display the cost of each and let your customers choose the method they prefer.

You can install each shipping module separately, so that only the shipping methods you use will appear in your store. The complete list of pre-installed shipping modules is found at Admin => Modules => Shipping.

If you wish to use more than one shipping module, it is best to install only one at a time and test it thoroughly before installing another.

Many shipping modules let you limit their use to certain zones -- usually countries. You must enter the 2-digit ISO code in these fields. These codes can be found at http://www.iso.org/iso/country_codes/iso_3166_code_lists/english_country_names_and_code_elements.htm

To install a shipping module, select it, click "Install," then click "Edit" to enter the required information. When you are finished with the set up, click "Update."

Note: You must have weights entered for your products in order to use any shipping modules. If there is no weight, CRE Loaded assumes the products are downloads, and will only assign "Free Shipping" to the order even if you have other shipping modules installed. See "Creating Your Catalog, Section 2.1" for information on adding product weights.

Australia Post Parcel Post

Australia Post Parcel Post is a domestic service for parcels up to 20kg with no one dimension exceeding 105cm and the girth not exceeding 140cm.

Enable auspost: Set this value to "True" to enable the module.

Insurance: Enter the amount you charge for insurance. Format: "25:5.00,50:8.50" -- for a merchandise value to $25, charge $5.00 for insurance; for a merchandise value from $25 to $50, charge $8.50, etc.

Dispatch Postcode: Enter the Postcode from which the order will be shipped.

Handling Fee: Enter the amount of any handling fee you charge.

Parcel Height: Enter the maximum height in mm of parcels to be shipped by this method.

Parcel Width: Enter the maximum width in mm of parcels to be shipped by this method.

Parcel Depth: Enter the maximum depth in mm of parcels to be shipped by this method.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Australia Post International Parcel Post - AIR

Use this module for international shipping of parcels up to 20kg with no one dimension exceeding 105cm and the girth not exceeding 140cm.

Enable auspostair: Set this value to "True" to enable the module.

Insurance: Enter the amount you charge for insurance. Format: "25:5.00,50:8.50" -- for a merchandise value to $25, charge $5.00 for insurance; for a merchandise value from $25 to $50, charge $8.50, etc.

Dispatch Postcode: Enter the Postcode from which the order will be shipped.

Handling Fee: Enter the amount of any handling fee you charge.

Parcel Height: Enter the maximum height in mm of parcels to be shipped by this method.

Parcel Width: Enter the maximum width in mm of parcels to be shipped by this method.

Parcel Depth: Enter the maximum depth in mm of parcels to be shipped by this method.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Australia Post International Parcel Post - Economy

Use this module for international shipping of parcels.

Enable ausposteconomy: Set this value to "True" to enable the module.

Insurance: Enter the amount you charge for insurance. Format: "25:5.00,50:8.50" -- for a merchandise value to $25, charge $5.00 for insurance; for a merchandise value from $25 to $50, charge $8.50, etc.

Dispatch Postcode: Enter the Postcode from which the order will be shipped.

Handling Fee: Enter the amount of any handling fee you charge.

Parcel Height: Enter the maximum height in mm of parcels to be shipped by this method.

Parcel Width: Enter the maximum width in mm of parcels to be shipped by this method.

Parcel Depth: Enter the maximum depth in mm of parcels to be shipped by this method.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Australia Post Express Post Parcel

Use this module for shipping parcels up to 20kg with no one dimension exceeding 105cm and the girth not exceeding 140cm via Australia Post Express Post International.

Enable auspostexpress: Set this value to "True" to enable the module.

Insurance: Enter the amount you charge for insurance. Format: "25:5.00,50:8.50" -- for a merchandise value to $25, charge $5.00 for insurance; for a merchandise value from $25 to $50, charge $8.50, etc.

Dispatch Postcode: Enter the Postcode from which the order will be shipped.

Handling Fee: Enter the amount of any handling fee you charge.

Parcel Height: Enter the maximum height in mm of parcels to be shipped by this method.

Parcel Width: Enter the maximum width in mm of parcels to be shipped by this method.

Parcel Depth: Enter the maximum depth in mm of parcels to be shipped by this method.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Australia Post International Parcel Post - SEA

Use this module for shipping parcels via Australia Post Sea Mail Parcels.

Enable auspostsea: Set this value to "True" to enable the module.

Insurance: Enter the amount you charge for insurance. Format: "25:5.00,50:8.50" -- for a merchandise value to $25, charge $5.00 for insurance; for a merchandise value from $25 to $50, charge $8.50, etc.

Dispatch Postcode: Enter the Postcode from which the order will be shipped.

Handling Fee: Enter the amount of any handling fee you charge.

Parcel Height: Enter the maximum height in mm of parcels to be shipped by this method.

Parcel Width: Enter the maximum width in mm of parcels to be shipped by this method.

Parcel Depth: Enter the maximum depth in mm of parcels to be shipped by this method.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Canada Post Parcel Service

Use this module to ship parcels up to 2m long and with a girth not exceeding 3m. To use this module you must first open a business account with Canada Post.

Enable Canada Post Shipping: Set this value to "True" to enable the module.

Enter Canada Post Server IP: Enter the IP address provided for your Canada Post business account.

Enter Canada Post Server Port: Enter the server port provided for your Canada Post business account.

Enter Selected Language(optional): Enter "en" to use English or "fr" to use French as the default language.

Enter Your Canada Post Customer ID: Enter the Customer ID for your Canada Post business account.

Enter Turn-Around Time(optional): Enter the desired turn-around time in hours.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

FedEx

You will need to have registered for an account with FedEx to use this module.

Enable Fedex Shipping: Set this value to "True" to enable the module.

Your Fedex Account Number: Enter your FedEx Account Number.

Your Fedex Meter ID: Enter the ID number of your Fedex Meter. Enter "NONE" to obtain a new meter number.

cURL Path: Enter the path to the cURL program on your server. Enter "NONE" to execute cURL using PHP.

Debug Mode: Select "True" to turn on the Debug mode for error tracking.

Weight Units: Select pounds or kilograms as your default unit of weight.

Which server to use: Select "test" while setting up this module or to run debug testing. You must select "Production" before you make this shipping module live on your site.

First line of street address: Enter the first line of the street address from which you ship orders.

Second line of street address: Enter the first line of the street address from which you ship orders.

City name: Enter the name of the city from which you ship orders.

State or Province name: Enter the 2-letter state or province name from which you ship orders. This is required for use in Canada and the U.S.

Postal code: Enter the postal code for the address from which you ship orders.

Phone number: Enter a contact phone number for your company.

Drop-off type: Enter a value for your normal method of delivering shipments to FedEx: 1 = regular pickup, 2 = on-call pickup, 3 = dropped off at FedEx drop box, 4 = BSC drop off, 5 = station drop off.

Display Transit Times: Select "True" to show estimated transit times for ground or home delivery rates.

Fedex surcharge? Enter the amount of any surcharge to add to shipping charge.

Insurance? Enter the dollar value at which you require customers to purchase insurance.

Residential surcharge? Enter the amount of any residential delivery surcharge (in addition to other surcharges) for Express package delivery in the U.S. or ground package delivery in Canada.

Enable Envelope Rates? Select "True" to quite the FedEx envelope rate for any packages under 1/2 lb or 0.23kg.

Sort rates: Select the order in which to sort shipping rate options.

Timeout in Seconds: Enter the maximum time in seconds to wait for a rate request from FedEx. Enter "NONE" to use the default timeout.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Flat Rate

Use this module to charge a single flat rate for shipping on all orders regardless of the actual shipping costs.

Enable Flat Rate Shipping: Set this value to "True" to enable the module.

Flat Rate Shipping Cost: Enter the amount of the flat-rate shipping charge.

Flat Rate Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Flat Rate Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

FREE SHIPPING

Use this module if you offer free shipping on any orders.

Enable Free Shipping: Enter "1" to enable this module.

Per Item

Use this module to charge a set fee per item shipped (e.g., $2.50 for one item, $5 for two items, etc.).

Enable Per Item Shipping: Set this value to "True" to enable the module.

Per Item Shipping Cost: Enter the shipping cost of one item. This value will be multiplied by the number of items in an order that uses this shipping method.

Per Item Shipping Handling Fee: Enter any handling fee charged for this shipping method.

Per Item Shipping Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Per Item Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Percent Rate

Use this module to charge a percentage of the order total as a shipping fee.

Enable Percent Shipping: Set this value to "True" to enable the module.

Percentage Rate: Enter the percentage to charge, in decimal format (.01 to .99)

Charge Flat Rate for Orders Under: If you want to charge a flat rate instead of a percentage for shipping orders under a certain value, enter that value here.

Flat Rate Shipping Fee: Enter the amount of the flat-rate shipping fee.

Percent Rate Tax Class: Select the tax class for the shipping fee (not the merchandise).

Percent Rate Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Royal Mail Registered

This module is for shipping within the UK. Registered mail is tracked at every stage of its route and the addressee has to sign for the item to accept delivery, offering both you and your customer security and peace of mind.

Enable Zones Method: Select "True" to enable this module.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Zone 1 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 1. Separate multiple entries with commas but without spaces.

Zone 1 Shipping Table: Enter the shipping rates you charge for insurance for various shipment weights. Format: "3:8.50,7:10.50,..." -- packages up to 3 pounds or kilograms (depending on your default weight unit) would cost 8.50 for Zone 1 destinations, packages from 3.01 to 7 pounds would cost 10.50, etc.

Zone 1 Handling Fee: Enter any handling fee you charge for this shipment method.

Royal Mail Special Delivery

Royal Mail Special Delivery offers guaranteed overnight shipping within the UK for packages up to 10kg.

Enable Zones Method: Select "True" to enable this module.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Zone 1 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 1. Separate multiple entries with commas but without spaces.

Zone 1 Shipping Table: Enter the shipping rates you charge for insurance for various shipment weights. Format: "3:8.50,7:10.50,..." -- packages up to 3 pounds or kilograms (depending on your default weight unit) would cost 8.50 for Zone 1 destinations, packages from 3.01 to 7 pounds would cost 10.50, etc.

Zone 1 Handling Fee: Enter any handling fee you charge for this shipment method.

Store Pickup

Use this module if have a brick-and-mortar store and provide in-store pickup during regular business hours of items bought online.

Enable Store Pick Up: Select "True" to enable this module.

Store Pickup Cost: Enter the amount of any fee you charge for in-store pickup.

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Royal Mail Standard Parcel

Royal Mail Standard Parcel service delivers parcels up to 20kg and 1.5m long within the UK.

Enable Zones Method: Select "True" to enable this module.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Zone 1 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 1. Separate multiple entries with commas but without spaces.

Zone 1 Shipping Table: Enter the shipping rates you charge for insurance for various shipment weights. Format: "3:8.50,7:10.50,..." -- packages up to 3 pounds or kilograms (depending on your default weight unit) would cost 8.50 for Zone 1 destinations, packages from 3.01 to 7 pounds would cost 10.50, etc.

Zone 1 Handling Fee: Enter the amount of any handling fee you charge for this shipment method.

Table Rate

Table Rate Shipping lets you charge a variable shipping fee based on the total cost or weight of an order.

Enable Table Method: Select "True" to enable this module.

Table Method Shipping Table: The shipping cost is based on the total cost or weight of items (see Table Method below). Enter the units and the fee in the format "25:5.50,50:8.50,..." -- for orders up to 25 (pounds/kilos or dollars) charge 5.50 for shipping, from 25.01to 50, charge 8.50, etc.

Table Method: Select the unit on which your rate table is based: weight or cost of the order.

Table Method Handling Fee: If you charge a handling fee for this shipping method, enter the amount here.

Table Method Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

United Parcel Service

You will need to have registered an account with UPS to use this module.

Enable UPS Shipping: Set this value to "True" to enable the module.

UPS Pickup Method: Enter the code for your normal method of delivering shipments to UPS: CC = Customer Counter, RDP = Daily Pickup, OTP = One-Time Pickup, LC = Letter Center, OCA = On-Call Air.

UPS Packaging? Enter the code for the type of packaging you normally use for UPS shipments:

CP = Your Packaging, ULE = UPS Letter, UT = UPS Tube, UBE = UPS Express Box.

UPS Residential Delivery? If you typically ship orders for delivery to residential addresses, enter "RES"; if you typically ship orders for delivery to commercial addresses, enter "COM".

UPS Handling Fee: Enter the amount of any handling fee you charge for shipping by UPS.

UPS Tax Class: Select the tax class for the shipping fee (not the merchandise).

UPS Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

UPS Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

UPS Shipping Methods: Select the USPS delivery services you offer: 1DM = Next Day Morning, IDML = Next Day Morning Letter, 1DA = Next Day, 1DAL = Next Day Letter, 1DAPI = , 1DP = , 1DPL = , 2DM = Second Day Morning, 2DML = Second Day Morning Letter, 2DA = Second Day, 2DAL = Second Day Letter, 3DS = 3 Day Select, GND = Ground, STD = Canada, XPR = World XP, XPRL = World XP Letter, XDM = World Expedite Plus, XDML = World Expedite Plus Letter, XPD = World Expedite.

United Parcel Service Advanced (CRE Loaded 6.3 only)

This module provides advanced settings for your UPS account, including Dimensional Weight support. You will need to have registered an account with UPS to use this module.

Enable UPS Shipping: Set this value to "True" to enable the module.

UPS Rates Access Key: Enter the XML rates access key provided to you by UPS.

UPS Rates Username: Enter your UPS Services account username.

UPS Rates Password: Enter your UPS Services account password.

UPS Pickup Method: Select the method you typically use to deliver packages to UPS. This setting is used only for shipments originating in the U.S.

Packaging Type: Select the packaging type you typically use for UPS packages.

Customer Classification Code: Select your UPS customer classification: 01 = You bill to a UPS account and have a daily UPS pickup, 03 = You bill to a UPS account but do not have a daily pickup, 04 = You ship from a retail outlet (only used for shipments originating in the U.S.).

Shipping Origin: Select the region from which you ship packages.

Origin City: Enter the name of the city from which you ship packages.

Origin State/Province: Enter the two-letter code for the state or province from which you ship packages.

Origin Country: Enter the two-letter code for the country from which you ship packages.

Origin ZIP/Postal Code: Enter the postal code from which you ship packages.

Quote Type: Select whether you typically ship orders for delivery to residential or to commercial addresses.

Negotiated Rates: Select "True" if you receive discounted rates from UPS and want to automatically receive shipping quotes based on this negotiated rate. You must enter your UPS account number below.

UPS Account Number: Enter your UPS account number here if you selected "True" for Negotiated Rates above.

Manual Negotiated Rate: If you receive discounted rates from UPS but do not want to use the automated quotes available for your UPS account, enter your negotiated rate as a percentage of the standard UPS rate. Negotiated Rates (above) must be set to "False" in order to use this setting.

Handling Type: If you charge a handling fee for UPS shipments, select whether that fee is a flat fee or a percentage of the order total.

Handling Fee: Enter the amount or percentage of any handling fee you charge for shipping by UPS.

Enable Insurance: Select "True" to insure packages shipped by UPS.

UPS Currency Code: Enter the three-letter code for the currency in the country from which you ship packages.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Sort Order of Display: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Disallowed Shipping Methods: Select the UPS delivery services you do not offer.

Shipping Delay: Enter the number of days it takes you, on average, to ship an order once it is received. This value is used to provide an estimated arrival date for your customers' orders.

Email UPS Errors: Select "Yes" to receive UPS error notifications by email.

Time in Transit View Type: Select "Not" if you do not wish to display estimated time in transit to your customers. Select "Raw" to display basic time in transit. Select "Detailed" to display detailed time in transit information.

Display Weight: Select "True" to display the number of packages and the package weight.

Dimensions Support: Select "No" if you do not use UPS Dimensional Weight. Select "Ready-to-ship only" if you use UPS Dimensional Weight only for shipments in standard UPS-provided packaging. Select "With product dimensions" to calculate UPS Dimensional Weight shipping based on individual package dimensions. See the UPS website for an explanation of UPS Dimensional Shipping.

Unit Weight: Select whether your package weights are measured in pounds or kilograms.

Unit Length: Select whether your package lengths are measured in inches or centimeters.

United States Postal Service

You will need to register for a USPS account to use this module. Note that you must use pounds and ounces as the weight measure for your products if you use this module.

Enable USPS Shipping: Select "True" to enable this module.

Enter the USPS User ID: Enter the User ID for your USPS account.

Enter the USPS Password: Enter the password for your USPS account.

Which server to use: Select "test" while setting up this Module or to run debug testing. You must select "Production" before you make this Shipping Module live on your site.

Create debug response file: Select "True" if you want to create a debug file to review test responses from USPS.

Handling Fee: If you charge a handling fee for this shipping method, enter the amount here.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Shipping Zone: If you have previously set up zones, selecting a zone here will display this shipping module only to those customers within that zone. This is used primarily to limit use of the shipping module to certain countries.

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

USPS Options: Select the USPS options you wish to display for your customers.

Domestic Shipping Methods: Select the domestic shipping services you offer.

Int'l Shipping Methods: Select the international shipping services you offer.

World Zone Rates

This module lets you set up three separate shipping zones (for instance, state, national, and international). This is a good generic shipping module that is not linked to any specific shipper -- it will simply charge the fees you indicate for each zone no matter what method you use to ship orders.

Enable Zones Method: Select "True" to enable this module.

Tax Class: Select the tax class for the shipping fee (not the merchandise).

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Zone 1 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 1. Separate multiple entries with commas but without spaces.

Zone 1 Shipping Table: Enter the shipping rates you charge for various shipment weights to Zone 1. Format: "5:5,7:10.00,99,100..." -- packages up to 5 pounds or kilograms (depending on your default weight unit) would cost 5.00 for Zone 1 destinations, packages from 5.01 to 7 pounds would cost 10.00, etc.

Zone 1 Handling Fee: Enter the amount of any handling fee you charge for shipping orders to Zone 1.

Zone 2 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 2. Separate multiple entries with commas but without spaces.

Zone 2 Shipping Table: Enter the shipping rates you charge for various shipment weights to Zone 2. Format: "2,10.00,5:15.00,..." -- packages up to 2 pounds or kilograms (depending on your default weight unit) would cost 10.00 for Zone 2 destinations, packages from 2.01 to 5 pounds would cost 15.00, etc.

Zone 2 Handling Fee: Enter the amount of any handling fee you charge for shipping orders to Zone 2.

Zone 3 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 3. Separate multiple entries with commas but without spaces.

Zone 3 Shipping Table: Enter the shipping rates you charge for various shipment weights to Zone 3. Format: "2,20.00,5:25.00,..." -- packages up to 2 pounds or kilograms (depending on your default weight unit) would cost 20.00 for Zone 3 destinations, packages from 2.01 to 5 pounds would cost 25.00, etc.

Zone 3 Handling Fee: Enter the amount of any handling fee you charge for shipping orders to Zone 3.

Single Zone Rates

Like World Zones, Single Zone Rates is a good generic shipping module; it is not linked to any specific shipper, so it will simply charge the fee you indicate no matter what method you use to ship orders.

Enable Zones Method: Select "True" to enable this module.

Zones Tax Class: Select the tax class for the shipping fee (not the merchandise).

Zones Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.

Zone 1 Countries: Enter the two-character ISO country codes for all countries that are part of Zone 1. Separate multiple entries with commas but without spaces.

Zone 1 Shipping Table: Enter the shipping rates you charge for insurance for various shipment weights. Format: "3:8.50,7:10.50,..." -- packages up to 3 pounds or kilograms (depending on your default weight unit) would cost 8.50 for Zone 1 destinations, packages from 3.01 to 7 pounds would cost 10.50, etc.

Zone 1 Handling Fee: Enter the amount of any handling fee you charge for this shipment method.

Shipwire

Shipwire.com is a warehousing and shipping service. When you sign up for a Shipwire account, Shipwire will store your merchandise in their warehouses and ship orders directly to your customers. CRE Loaded fully integrates Shipwire support -- when you use the Shipwire module, it automatically transmits orders to Shipwire for packing and shipping.

Before you use the Shipwire module in CRE Loaded, you must open a Shipwire account at www.shipwire.com.

The Shipwire module is found in Admin => Modules => Checkout Success. Click "Install" to install the Shipwire module, then click "Edit" to configure the module.

Enable ShipWire: Select "True" to enable the module.

Display ShipWire Banner: Select "True" to display the ShipWire Banner and Shipwire Fullfillment ID at checkout.

Shipwire Affiliate URL: Enter the Shipwire Affiliate URL you were given when you opened your Shipwire account.

ShipWire Host Address: Enter the Shipwire Host Address you were given when you opened your Shipwire account.

ShipWire Server Address: Enter "Production" to send orders to Shipwire. Enter "Test" in order to test or debug the module without sending orders to Shipwire -- use this in conjunction with Transaction Debug (below).

Email Address: Enter the email address you have registered with Shipwire.

ShipWire Password: Enter your Shipwire password. Note: this password is case-sensitive!

Transaction Debug: Select "True" to turn on the Debug mode for error tracking.

Sort Order: Sort order lets you set the order in which your payment types are displayed, so that your preferred method will always be shown first. Numbers are displayed lowest to highest.